ERIC reads engineering drawings and blueprints, extracts their title block and bill of materials (BOM), and runs design checks — all from one desktop app.
This guide covers every module: what it does, how to use it, and the result you should expect. It describes ERIC 1.2.1.
What you need: nothing to start. Title block + BOM extraction from PDFs, DXF and scans works offline with no account (DWG needs the free ODA File Converter — see §6). For AI enrichment (scans and photos, richer tables, AI review, Assistant/Agent answers) add your own Sarvam API key in Settings — it is stored encrypted on this PC and used only for your requests (internet required). Exactly what is sent, and when, is in PRIVACY.md (installed next to the app) and §15.
1. What the app does#
| Capability | What it gives you |
|---|---|
| Extract | Title block (drawing number, title, project, client, drawn/checked/approved by, scale, date) + a full BOM — everything named/annotated on the drawing (equipment, valves, instruments, beams, fasteners), each with quantity and rating, merged from the tabulated BOM. |
| Review | Design-standards check + a BOM-driven mechanical mate check (shaft→bearing, bolt→nut). |
| Compare | Diffs two revisions and checks a BOM against a reference BOM/ERP. |
| Quote | Draft quote from a BOM + a cost/rate table. |
| Similar | Finds drawings similar to a given drawing. |
| Assistant | Answers questions about a drawing from its extracted data, e.g. "list all MCCBs and their ratings" or "what is the transformer rating". |
| Search | Queries everything you've extracted. |
| Export | Writes results to CSV, Excel (XLSX) or an ERP-ready flat CSV. |
Every result carries a confidence (high / medium / low), a source reference, and a reviewed flag, so you can trust — and audit — what the app produced.
2. Installing and launching#
System requirements#
| Windows | Windows 10 or 11, 64-bit (x64) |
| Rights | Administrator rights to install (installs to Program Files) |
| Browser | A current Edge, Chrome or Firefox as the default browser |
| Memory | 8 GB RAM recommended (4 GB minimum); large scanned packages use more |
| Disk | ~400 MB for the program; plus space for your data: page renders for the viewer and temporary files during processing — allow 2–5 GB free for large RFP packages (an 800-page RFP can use 1–2 GB temporarily) |
| DWG files | the free ODA File Converter (see §6) |
| Internet | Not required. Only for the optional Sarvam features (with your own key) and the licence time check — see PRIVACY.md |
Install, upgrade, uninstall#
- Download the installer from https://drawingops.com/download/eric and
run
ERIC-Setup-1.2.1.exe. It is code-signed by Mir Solutions LLP; Windows shows that name as the publisher. - It installs to
C:\Program Files\ERICand can create a desktop shortcut. - Launch from the desktop shortcut or the Start menu.
Upgrading: run the new installer over the old one. Your drawings, BOMs, settings, API key and licence are kept — they live in your Windows profile, not in the program folder. If ERIC is running, Setup asks it to close first (a running extraction stops after its current page). If an old 1.0 installation is found, Setup offers to remove it first; your data is kept.
Uninstalling: Settings → Apps → ERIC. You are asked whether to delete your data too (default: keep it).
The app opens in your web browser and runs entirely on this PC (it listens on 127.0.0.1 only). Close it from the tray icon → Exit; it also closes itself a few minutes after the browser tab is closed, unless a job is running. If a job is running when you exit, it is stopped after the current page (what is already processed is kept) and the app closes within about 30 seconds.
3. Navigating the app#
| Section | What it's for |
|---|---|
| Overview | Start here — bring in drawings, then act on them |
| Extract | Title block + BOM from drawings and packages |
| Search | Query the extracted data |
| Documents | Specs and manuals extracted from packages |
| Review | Design check + mechanical mate check |
| Compare | Revision diff + BOM check |
| Similar designs | Find drawings that match a given one |
| Agent | Describe a job — the agent plans, runs the tools, and asks before saving |
| Quote | Draft quote from BOM + rate table |
| RFP | Drop an RFP package (PDF/ZIP) — split drawings from specs |
| Assistant | Ask questions about a drawing (panel available everywhere) |
4. License (Ed25519-signed)#
The app runs a 15-day free trial on first launch, tied to your machine and to network time (so it can't be extended by rolling the clock back). When the trial or license ends, your existing drawings, BOMs and exports stay available — only new processing and the analysis tools pause until a license key is activated.
- The license badge in the sidebar shows the trial days left,
Licensed,ExpiredorInvalid. - To buy and activate a license:
- Open Settings and Copy your Machine ID (32 letters and digits).
- Go to https://drawingops.com/checkout, paste the Machine ID, choose 6 months or 1 year, enter your email and pay by UPI, card or net banking.
- The license key is emailed to you as soon as the payment clears.
- Paste it into the License key field in Settings and click Activate.
- To renew, buy again for the same Machine ID: the new term is added on. Lost the key? Use Lost key on the checkout page with the same Machine ID and email. No internet on that PC? Send the Machine ID to hello@mirsolutions.in.
License keys are Ed25519-signed and bound to your machine (its Windows installation ID). A key for one machine will not work on another; changing network adapters, VPN, docking station, PC name or Windows user does not affect it. Reinstalling Windows does: write to hello@mirsolutions.in for a new key. The app can only verify keys, never create them.
5. Settings (bottom of the sidebar)#
| Setting | What it does |
|---|---|
| Document type | The domain: Auto-detect (default), Structural, Electrical, Electrical (SLD), HVAC, Schematics (P&ID), or Engineering. Auto-detect lets the reader choose from the drawing's own text; picking a discipline forces it — a multi-discipline sheet read as Structural yields the beam/column schedule, as Electrical the cable/load schedule, as Mechanical/Engineering the pump/blower schedule. It also drives which component types are extracted into the BOM and the review rules/standards. |
| Sarvam API key | Optional — your own key from Sarvam (each user/PC enters their own). Powers AI enrichment: scans and photos, richer table fill, AI review, and fuller Assistant/Agent answers (internet required). Stored encrypted for your Windows user. Title block + BOM extraction from PDFs and CAD is deterministic-first and works offline with no key. |
| Gemini API key | Optional (legacy). Not needed. |
| Standards reference CSV | Optional. Pick a CSV (code,name,domain,region) and Save to DB to add your own standards to the reference used by lookup and review. |
| Machine ID | Your machine's fingerprint (read-only, with a Copy button). |
| License key | Paste the key you were emailed and click Activate. |
| About & support | Shows the version, log file and database path. Open log folder opens %LOCALAPPDATA%\ed_vision\logs; Copy diagnostics copies version, paths, licence state, system and the last log lines (keys and tokens removed) to send to support. |
Help (bottom of the sidebar) opens this guide and, from its toolbar, the Third-party notices, Privacy statement and Licensing information.
6. Extract — turn drawings into data#
The core workflow: turn drawings into structured data.
- Go to Extract.
- Add files by dragging them from Explorer onto the app window, or with Add files.
- Supported formats: PDF, PNG, JPG, JPEG, TIFF, WebP, DXF, DWG, ZIP (ZIP/RFP packages may also contain CSV and Office documents, which are listed as documents). DWG needs the free ODA File Converter installed (see below); without it a DWG produces no result — save it as DXF from your CAD tool, or install the converter.
- Click Process. To stop a long run, click Cancel — the page in progress finishes, everything already processed is kept.
Limits. One upload (the set of files you add at once) can be up to 1 GB; the app sends bigger selections in several batches by itself and tells you which file is too large. ZIP packages: at most 3 levels of nested ZIPs, 5,000 files and 2 GB unpacked. Very large pages are rendered at a lower resolution (at most 40 megapixels) to keep memory in check.
DWG files. ERIC reads DXF directly. For DWG it uses the free ODA File
Converter from the Open Design Alliance
(https://www.opendesign.com/guestfiles/oda_file_converter). Install it to its
default folder (C:\Program Files\ODA\ODAFileConverter\); ERIC finds it
automatically. It is not included in the ERIC installer.
Expected result: each drawing's title block + BOM are stored. The file list shows each file's status. Without an API key the status line says Offline extraction only — PDFs with a text layer and CAD files are fully read; scans and photos get an OCR title block and a rough item list.
Only the files you add are processed. The app never scans your drives.
CAD drawings: viewer + measurements#
DXF/DWG are read as exact text (no OCR) and, when you click the drawing in the file list, the detail panel shows:
- Viewer — the sheet rendered with its real geometry and text (zoomable).
- Bill of materials — empty for architectural floor plans (they carry rooms and schedules, not a parts BOM).
- Measurements card — the room/space schedule, door/window openings, floor grouping (LOWER / UPPER) and total area, plus the domain-bound schedule (room / door-window / beam / cable / pump) reconstructed from the sheet — every schedule on a combined sheet is listed.
Rasters behave the same. A PNG/JPG/WebP is OCR'd (or read by Sarvam vision)
and run through the same schedule reader, so a raster schedule sheet yields
the same domain-bound table as a DXF. A schematic's legend
(No. | Tag | Description | Qty) is captured as its bill of materials.
OCR-derived results are tagged approx (OCR) — vector and Sarvam results have
no such warning.
Export CSV (and ERP) writes all of it in one file: the BOM block, a
MEASUREMENTS block (spaces/openings with width × height and area), and a
SCHEDULE block per schedule (plus the legend/BOM rows).
Full BOM from named + annotated components#
Process runs the deterministic extractor first and Sarvam on top, so a
drawing yields a complete BOM, not just what sits in a table — and so it still
works offline:
- Built-in reading (offline) — the title block and any bill-of-materials table are read from the drawing's own text, and built-in OCR recovers pages without text. This is what runs when there is no API key.
- Tabulated extraction (Sarvam) — the doc-ai schema fills in what the geometry missed (precise part numbers / materials).
- Annotated extraction — for drawings with a text layer (PDFs), the drawing's own annotations are read and parsed into the named components that live scattered across the sheet — transformers, valves, pumps, beams, breakers — which a table-only pass would miss.
The two are merged, de-duplicated by description, and stored on one drawing row. The annotated step is domain-aware: it looks for valves/instruments on a P&ID, beams/bolts/rebar on a Structural sheet, breakers/relays on an Electrical schematic, AHUs/ducts on HVAC, and gears/bearings/fasteners on Engineering drawings.
Quantities and ratings#
- Identical components are aggregated:
TRANSFORMER-1+TRANSFORMER-2become oneTRANSFORMERline with qty 2. - Components of the same type but different ratings stay separate:
MCCB 25A 3P,MCCB 63A 3PandMCCB 400A 3Pare three lines, each with its own count. - Spec/field labels (
RATING,RATIO,CLASS,BURDEN,HV SIDE, …) are filtered out so they don't pollute the BOM.
The app can only report a rating that is annotated on the drawing. A single-line diagram often labels that an MCCB exists but not its amp rating (that lives on the panel-detail sheet) — in that case the rating column is left empty rather than guessed.
Managing files (dedupe + delete)#
- Re-uploading the same file (e.g. a browser
-1/-2suffix) does not create a duplicate — the app fingerprints file content and merges identical drawings into one row. - Each row in the Files list has a ✕ button to delete a drawing (and its BOM) individually.
ZIP and RFP packages#
A dropped ZIP is extracted recursively and split into drawings
(processed for title block + BOM) and documents (specs/BOMs — content
extracted and stored, searchable in the documents table). PDFs are classified
page by page. When a PDF carries an outline, its table of contents routes
pages by section first — "4. Drawings" pages are processed, "3. Technical
Specification" pages are stored as text — so an 800-page RFP becomes an ~80-page
drawing job.
For safety, a package is refused (with the reason shown in Documents) if it nests ZIPs more than 3 levels deep, holds more than 5,000 files, or unpacks to more than 2 GB.
View a drawing (interactive viewer)#
Click a drawing in the Extract file list to open it in the interactive viewer:
- Zoom & pan any large sheet smoothly (deep-zoom tiling + a navigator mini-map). Expected result: the drawing opens full-size; zoom and pan to inspect any detail next to its extracted data.
7. Search — query the extracted data#
- Go to the Search tab.
- Pick what to search: Part number, Drawing number, Material, Any text (part, description, drawing) or Spec / document text.
- Type a value (e.g.
P-001,SS316,gate valve) and click Search (or press Enter). One field per search; there is no multi-filter builder.
Expected result: a table of matching rows with drawing number, title, domain, part number, description, material, quantity, and standards cross-references.
8. Review — design check + mechanical mate check#
- Go to the Review tab.
- Pick a Drawing (drawings come from Extract).
- Click Run review.
The app runs these checks per drawing:
- Title block completeness — required fields present?
- AI review (needs your Sarvam key) — flow-direction errors, missing instrumentation, incomplete control loops, wrong line types.
Expected result: issues listed with severity (error/warning/info), check, message, and standards. Each issue has a Reviewed checkbox (also Mark reviewed / not reviewed in the issue detail, with Undo); the filter above the list shows All, Not reviewed or Reviewed, and the CSV export has a Reviewed column.
Mechanical mate check (BOM-driven)#
For drawings with a BOM, the app also runs a mechanical design review: it parses the BOM descriptions and checks the grammar's mate rules.
Expected result: flags like:
- ⚠️
shaft listed but no bearing (a shaft is supported by a bearing) - ⚠️
bolt listed but no nut (a bolt is fastened with a nut) - ℹ️
hex_bolt listed but none of its mates present (nut, washer…)
This uses a 52-class mechanical-component vocabulary (MCB taxonomy), so "ball bearing", "hex bolt", "spur gear" are all recognized specifically.
Domain relationship review (all domains)#
Alongside the mechanical mate check, the app runs a domain relationship review against a per-domain component taxonomy (seeded from ISA-5.1/ISO 10628 for P&ID, IEC 60617/C37.2 for Electrical, ASHRAE for HVAC, AISC/ASTM for Structural). It flags a BOM line whose required partners are absent, e.g.:
- ℹ️
pump listed but none of its related components present (check valve, discharge valve…) - ℹ️
beam listed but none of its related components present (column, girder…) - ℹ️
control valve listed but none of its related components present (actuator, positioner…)
These are info-level flags — best-effort heuristics (a single-line drawing may legitimately omit a partner shown on another sheet), not hard failures.
9. Compare — revision diff + BOM check#
Revision comparison#
- Go to the Compare tab.
- Pick Drawing A and Drawing B.
- Click Compare.
Expected result: title-block changes and BOM changes (added / removed / changed / unchanged), each with a confidence (high for part-number matches, medium for description matches).
BOM check (vs reference BOM/ERP)#
- Pick a Drawing.
- Click Load reference BOM… and select a CSV with a
part_nocolumn. - Click Check BOM.
Expected result: missing (in reference, not drawing), extra (in
drawing, not reference), and mismatched (qty/material differences) lines,
each with confidence and a reviewed flag.
10. Quote, Similar, Assistant#
Quotation (Quote tab)#
- Pick a Drawing.
- Click Load rate table… (CSV with a
unit_costcolumn). - Click Save rate table to keep that rate list in the database for reuse — the Agent can then quote from the saved table by name.
- Optionally set a Markup %.
- Click Generate quote.
Expected result: each BOM line priced (qty × unit cost) with priced_by
(part_no or material) and confidence (high for part-number pricing, medium
for material). Unpriced lines are listed separately with confidence: low.
Similar designs (Similar tab)#
- Pick a Drawing.
- Click Find similar.
Expected result: other drawings ranked by BOM similarity, each showing not just the score but which lines match, which are missing, and which are extra (matched / missing / extra, by part number, material, description).
Assistant (persistent panel + Assistant tab)#
The Assistant is available everywhere — a persistent bottom panel plus a dedicated tab. It answers questions about the current module's data, guides you through steps, explains results, and cross-references standards/HS/ISA-5.1 against the local reference DB. Direct lookups (title block, BOM, standards) answer offline; open-ended questions use your Sarvam key (internet required).
Expected result: a text answer with source references, e.g.
Drawing number: S-235 or a BOM listing.
Component + rating queries#
The Assistant answers targeted component queries from the extracted BOM, e.g.:
- "list all MCCBs and their ratings" →
MCCB 25A 3P (qty 3),MCCB 63A 3P (qty 2)… - "what is the transformer rating" → the transformer's spec (kVA/kV).
- "list all valves and their sizes" → each valve with its size/rating.
Ratings are only reported when they are annotated on the drawing — a single-line diagram may label that an MCCB exists but not its amp rating (that lives on the panel-detail sheet).
Agent (Agent tab)#
Describe what you want done in plain language — the Agent plans the steps, runs ERIC's own tools, and asks before it saves anything:
- Go to the Agent tab.
- Type a goal, e.g. "Give HS codes for the BOM on S-235 and flag anything needing review", "which drawings are similar to S-235", or "draft a quote for S-235 using the saved table rates".
- Click Run. It returns:
- a trace of every step (tool, arguments, result, timing),
- a deliverable (Markdown) with HS codes + IS / DIN / ASTM standards,
- a self-review and a signature (audit hash).
The tools it can plan over: BOM lookup, HS classification, manufacturing review, similar designs (score + matched/missing/extra lines), work instructions (optional checklist CSV), standard cross-reference, quote drafting (rate-table CSV or a saved rate table), and CSV export.
Writes (e.g. exporting a CSV) are blocked until you approve them — tick Approve writes and run again to actually save. The agent applies your office's house rules (skills) and remembers prior runs.
Every figure in the deliverable is mechanically checked to have come from a tool result, not invented by the model.
11. RFP drops (RFP tab)#
Drop a whole RFP package — a PDF or ZIP containing many drawings and specs — and the app splits it for you:
- Click Choose package… and pick a PDF or ZIP.
- The app classifies each page: drawing pages (routed for title block + BOM extraction) and spec documents (their text is extracted).
Expected result: a "Drawing pages" list (each page's name) and a "Spec documents" list with the extracted text, so you can see at a glance what an RFP contains before processing the drawings.
To extract the title block + BOM from the drawing pages, run Process in the Extract tab after the RFP split.
12. Exporting results#
Every module has an Export button:
| Module | Export |
|---|---|
| Extract | CSV (drawings.csv + bom_items.csv), ERP flat CSV, split report |
| Search | result rows to CSV |
| Review | issues to CSV |
| Compare | revision diff + BOM check to CSV |
| Quote | line items to CSV |
| Similar | similar-drawings list to CSV |
13. Standards cross-reference#
Every BOM material is enriched with cross-region equivalents:
| Source | Indian (IS) | International (ISO/ASTM) | European (EN/DIN) |
|---|---|---|---|
| ASTM A36 | IS 2062 E250 | ASTM A36 / ISO 630 S275 | EN 10025 S275 |
| ASTM A615 Gr 60 | IS 1786 Fe 500 | ASTM A615 Gr 60 / ISO 6935-2 B500 | EN 10080 B500B |
You can extend the built-in standards catalog with your own: in Settings,
pick a standards CSV (code,name,domain,region) and Save to DB. The Agent's
standard lookup and the review checks then read those rows too.
14. Troubleshooting & logs#
Logs (for support)#
ERIC writes a log to %LOCALAPPDATA%\ed_vision\logs\edvc.log (the five most
recent 2 MB files are kept). To open the folder: right-click the ERIC tray
icon → Open log folder (or paste %LOCALAPPDATA%\ed_vision\logs into the
Explorer address bar), or Settings → About & support → Open log folder /
Copy diagnostics. API keys, licence keys and session tokens are masked in
the log, so you can send edvc.log to support as it is.
To check an installation, open a Command Prompt and run:
"C:\Program Files\ERIC\ERIC.exe" --selftest --out "%TEMP%\edvc-selftest.json"
It tests the OCR, PDF and CAD readers and a small offline extraction without touching your data, and writes the result to that file (send it with the log).
| Problem | Fix |
|---|---|
| The app does not open / closes by itself | Look in the log (above). ERIC closes on its own a few minutes after the browser tab is closed; start it again from the Start menu. |
| "ERIC is already running but did not respond" | Wait a few seconds and start it again; if it persists, end ERIC.exe in Task Manager. |
| A file is refused as too large | One upload can be up to 1 GB; the reason is shown next to the file. Split very large packages. |
| A DWG produces nothing | Install the free ODA File Converter (§6) or save the drawing as DXF. |
| Sarvam features fail behind a company proxy | ERIC uses the Windows proxy settings and the Windows certificate store. If your company uses a PAC script only, ask IT for the proxy address and set the HTTPS_PROXY environment variable; allow api.sarvam.ai (see PRIVACY.md). |
| Windows SmartScreen warning on the installer | The installer is code-signed by Mir Solutions LLP; check right-click → Properties → Digital Signatures. If it is not signed by Mir Solutions LLP, do not run it: download it again from drawingops.com. A new release can show a SmartScreen notice for a few days until Windows knows it; with the right signature, click More info → Run anyway. |
| "Add files first" | Add and process files in Extract first. |
| Extraction returns nothing | The deterministic floor already runs without a key; check the drawing has a title block/BOM or a text layer. The Sarvam part (richer table fill) needs a key and network — when it fails (wrong key, quota, network), the deterministic result is kept and the job result shows a warning with the reason; details are in the log. |
| BOM has a component but no rating | The rating must be annotated on the drawing — a single-line diagram labels that a breaker exists, not its amp rating (that's on the panel-detail sheet). |
| BOM looks like the wrong domain | Pick the correct Document type in the dropdown before clicking Process — it forces which component types are extracted (valves for P&ID, breakers for Electrical, beams for Structural). Leave it on Auto-detect to let the reader choose from the drawing's own text. |
| CAD file shows no rooms / schedule | A DWG/DXF with no TEXT/MTEXT is read by rendering it and running Sarvam architectural vision (rooms/doors) — needs an API key. A drawing whose sizes are a per-wall dimension chain (not a W x H label) also relies on vision rather than the deterministic room pass. |
| Review shows "LLM review unavailable" | The AI review needs a valid API key + network; deterministic checks still run. |
| "Your free trial has ended" banner | Open Settings, copy your Machine ID and buy a key at drawingops.com/checkout; it is emailed to you. Your existing data stays viewable meanwhile. |
| "Offline extraction only" | No Sarvam API key is set. Add your own key in Settings for scans/photos and AI features. |
| License expired | Renew at drawingops.com/checkout with the Machine ID from Settings. |
| Assistant has no live web results | Web answers need a Gemini key in Settings. Without one, the Assistant answers from the drawing and the local standards database (and Sarvam, with your key). With one, a separate "From the web (Google Search)" answer and Google's search suggestions appear under the main answer. |
15. Data, storage and privacy#
- Extracted data:
%APPDATA%\ed_vision\blueprints.db(SQLite). - Settings:
%APPDATA%\ed_vision\config.json(your API key DPAPI-encrypted). - License state:
%APPDATA%\ed_vision\license.json. - Page renders for the viewer:
%LOCALAPPDATA%\ed_vision\renders(moved from %APPDATA% automatically on upgrade) (pruned automatically above 2 GB, oldest first). - Log:
%LOCALAPPDATA%\ed_vision\logs\edvc.log. - Database backups and WAL files: before an upgrade changes the database
layout, ERIC copies it to
blueprints.db.bak-<version>(e.g.blueprints.db.bak-1.2.0) next to it. While ERIC runs, the database also hasblueprints.db-walandblueprints.db-shmbeside it: to back up your data, close ERIC first (tray → Exit) or copy all three files together. - Licence install record:
C:\ProgramData\ed_visionandHKLM\SOFTWARE\ed_vision(written by the installer, kept on uninstall). - Temporary uploads: your Windows temp folder; removed when ERIC exits, and leftovers older than two days are removed at the next start.
- Uninstalling asks whether to also delete this data (drawings, settings, license). Choose No to keep it for a reinstall or upgrade.
What leaves your PC. Nothing, unless you enter your own Sarvam API key (then the pages you process and your Assistant/Agent questions go to Sarvam's API), set the optional Gemini key (Assistant questions go to Google), or are online when the licence checks the time (public time servers; no data from your drawings). There is no telemetry. The full list is in PRIVACY.md in the install folder.
Third-party software. ERIC includes third-party components; their licences
are in THIRD-PARTY-NOTICES.txt and THIRD-PARTY-LICENSES.txt in the install
folder.