Balloon Studio reads engineering drawings, finds what an inspector has to check, numbers each item with a balloon on the sheet and builds the inspection report. It also checks the drawing itself and flags what a reviewer would ask about. Everything runs on your own Windows PC.
This guide follows the app from installation to export. It describes Balloon Studio 0.5.4.
What you need: a Windows 10 or 11 PC (64-bit). No account, no internet and no administrator rights. Your drawings never leave the computer.
1. What the app does#
| Discipline | What Balloon Studio finds on a sheet |
|---|---|
| Mechanical | Dimensions, tolerances, GD&T frames, datums, threads, surface finishes and notes. Each one gets a numbered balloon, its nominal value, tolerance and drawing zone. |
| Electrical | Device tags and ratings on single-line and wiring diagrams, with ratings checked against standard IS / IEC values. |
| P&ID | Line numbers, instrument and equipment tags. |
| HVAC | Ducts and their sizes, terminals, equipment tags and air devices with their flow. |
| Structural | Beam sizes, member marks, sections, rebar callouts and schedule rows. |
| Plumbing and fire | Pipes and their sizes, fittings, pumps and tanks. |
Across a whole drawing set, Balloon Studio also runs set-level checks for P&ID, HVAC, structural, plumbing and fire drawings: for example, a member mark shown on a plan but missing from the schedule, a size on the plan that disagrees with the schedule, or equipment that is scheduled but shown on no plan.
Results come out as an Excel inspection report, a ballooned PDF and a JSON file for ERP or PLM systems.
2. Installing and starting#
System requirements#
| Windows | Windows 10 or 11, 64-bit |
| Rights | None: it installs for your Windows user only, with no administrator rights |
| Memory | 8 GB RAM recommended |
| Disk | About 1 GB for the program, plus space for your projects |
| DWG files | The free ODA File Converter (see §4) |
| Internet | Not needed |
Install#
- Download the installer from https://drawingops.com/download/balloon-studio.
- Run
BalloonStudio-0.5.4-setup.exe. It is code-signed by Mir Solutions LLP. Windows shows that name as the publisher. - Start Balloon Studio from the Start menu or the desktop shortcut.
The program installs to %LOCALAPPDATA%\Programs\Balloon Studio. To upgrade,
run the newer installer: your projects and settings are kept.
To uninstall, go to Windows Settings → Apps → Balloon Studio. Your projects
in %APPDATA%\BalloonStudio are kept, so a reinstall finds them again.
3. Library: projects and drawing sets#
The Library is the first screen. Work is organised in two levels:
- A project is a part, an assembly or a job, for example Pump assembly.
- A drawing set is one issue of the drawings in that project, for example Rev A issue or Rev B issue.
To start:
- Type a name in New project name and click Create project.
- Under the project, type a set name (for example Rev A issue).
- Pick the discipline in the list next to it. Leave it on Detect per sheet to let the app decide sheet by sheet, or force one discipline for the whole set.
- Click Add set. The set opens.
The Library table shows, for every set, its discipline, how many sheets are done, how many items were found, the open findings and its status.
4. Adding drawings and running#
In a set:
- Click Add drawings, or drag files from Explorer onto the window.
- Click Run. A progress bar shows each sheet as it is read.
Supported files: PDF from any CAD system, DXF, DWG, SVG and XPS. Every page of a PDF becomes a separate sheet.
- DWG needs the free ODA File Converter from the Open Design Alliance, installed in its default folder. Without it, save the drawing as DXF from your CAD tool.
- Scanned drawings and photos are not supported yet. Use the PDF exported from your CAD system.
- DXF files are exact. Every dimension and GD&T frame comes from the CAD data itself, so the balloons show exactly the text the CAD file holds.
When you add more drawings later, the button reads Run N new. It reads only the new sheets. Re-run all reads every sheet again. It replaces the balloons on sheets you already reviewed, so the app asks before it does that.
Cancel stops a run after the current sheet. If a run was interrupted (for example, the PC was shut down), the button reads Resume.
The sheet table shows each sheet's discipline, kind, status, item count, open findings, how long it took and whether you marked it reviewed. Click a finished sheet to open it.
5. The sheet workspace#
The workspace shows the drawing on the left and the Items and Findings lists on the right.
Moving around#
- Wheel zooms, drag pans, F or Fit shows the whole sheet.
- ‹ › in the toolbar go to the previous or next sheet in the set; ← Set goes back.
- Click an item in the list to jump to it on the drawing. Clicking a balloon on the drawing selects its row.
Checking and correcting items#
Select an item to open its editor above the list:
- Label is the requirement as written (for example
Ø40 h6). Change it and press Enter. - No. is the balloon number; Kind is the type (linear, diameter, GD&T, thread, note …).
- The fields below (nominal, tolerance, zone …) can be edited the same way.
- Needs review marks an item you want to come back to.
- Delete removes a wrong balloon.
To add a balloon the app missed, click + Add item (or press A) and draw a box around the text on the sheet. Drag a balloon's box to move it. Renumber numbers all balloons again in reading order, top to bottom and left to right.
Keyboard: ↑ ↓ move through items, Enter edits, Del deletes, R toggles Needs review, A adds, F fits, + / − zoom, Esc clears the selection.
Findings#
The Findings tab lists what the drawing checker found, each with a severity (error, warning or info). Examples:
- dimensions without a tolerance on a drawing with no general-tolerance note,
- empty or missing title-block fields, or units that are not stated,
- GD&T problems, such as a datum that is referenced but not on the sheet, or a form tolerance that references a datum,
- on electrical drawings, a breaker rating that is not a standard value or is written without its unit,
- on P&IDs, an instrument drawn twice on one sheet or a tag series that skips numbers.
Click a finding to see it on the sheet. Accept it once it has been dealt with, or Waive… it with a reason. Either can be re-opened. Untick Findings in the toolbar to hide them on the drawing.
Mark reviewed#
When you have checked a sheet, click Mark reviewed. Reviewed sheets count towards the accuracy score (§7), and a later Re-run leaves them alone unless you choose otherwise.
6. Confirm: teach it your conventions#
Every company balloons a little differently. On mechanical sheets the toolbar shows Confirm, with a number when there is something to answer.
- Click Confirm.
- Under Should these get a balloon? answer each question with Yes, balloon them or No, leave them out. Each question shows how many such items are on the sheet, with examples. Typical questions are about reference dimensions or notes.
- Under Symbols found, check each symbol the app detected. Each has a guess and how sure the app is, least certain first. Correct the guess in the list if needed and click Confirm. Confirm the N sure one(s) confirms only the guesses that are at least 80 % certain.
- Click Save to my profile, then Run again to apply to read the unreviewed sheets of the set again with your answers.
Your answers go into your drawing profile and apply to every later drawing. If a drawing comes from a CAD system your profile has not seen before, the app says so, so you can check it with extra care.
You can change or clear any answer later in Settings → Your drawing profile.
7. Accuracy on your drawings#
Once you have reviewed some sheets, the set page shows Accuracy on your drawings: the share of balloons that were right as delivered, plus how many you corrected, added (missed) and removed (extra).
Accuracy report (numbers only) downloads those figures. It contains no file names, part numbers, dimensions or images, so you can share it safely.
8. Exporting#
At the bottom of a set with results:
| Export | What you get |
|---|---|
| Excel (inspection + tags + findings) | The inspection report, one row per balloon with requirement, nominal, tolerance and zone, plus the tags and findings |
| Ballooned PDF | The drawings with every balloon drawn on them, for first-article inspection or a supplier |
| JSON (ERP / PLM) | All items and findings in a structured file for your systems |
9. Licence#
Balloon Studio runs a 15-day free trial with every discipline on first start. The top bar shows the state: Trial · N day(s), Licensed, Licence expired or Licence invalid.
Buying a licence#
- Click Buy in the top bar, or Buy a licence in Settings → Licence. The checkout opens in your browser with this PC's Machine ID already filled in.
- Choose 6 months or 1 year, enter your email and pay by UPI, card or net banking.
- The licence key is emailed to you as soon as the payment clears.
- In Settings → Licence, paste the key (it starts with
BS1.) and click Activate.
To renew, use Renew online in the same place: the new term is added on.
- A key works on the PC whose Machine ID it was made for (five groups of four letters and digits, shown in Settings with a Copy button).
- Lost the key? Use Lost key on https://drawingops.com/checkout with the same Machine ID and email; it is sent again.
- No internet on that PC? Send the Machine ID to
hello@mirsolutions.in. You get back a key, or a
.bslicfile to load with Import .bslic file.
10. Settings#
| Section | What it does |
|---|---|
| Licence | Licence state, modules, expiry, Machine ID with Copy, Buy/Renew, paste a key or import a .bslic file |
| PDF engine | How PDFs are read. PDFium is the default and recommended. pdfplumber is an alternative (slower on dense sheets). New runs use the setting you choose. |
| Your drawing profile | Your answers to what gets a balloon and the symbols you confirmed. Change any answer, rename or remove a symbol, or clear the whole profile. |
| Improvement report | Where the app's reading was wrong on this PC (see below) |
| Performance | Worker processes: 0 = automatic. More workers read big sets faster but use more memory. |
Improvement report#
Balloon Studio notes, on this computer only, where its reading was wrong. On DXF and DWG files it checks every dimension against the CAD data itself. On any drawing it notes the balloons you corrected.
Only the pattern is kept: every digit becomes 9, and file names and drawing content are never stored. Nothing is sent. Click Export report if you want to send it to us so the next version handles those cases; Clear deletes it.
11. Data and privacy#
- Projects, drawings and results:
%APPDATA%\BalloonStudio, one folder per project. Back it up like any other folder (close the app first). - The app listens only on this computer (127.0.0.1) and uses a fresh access key each time it starts.
- Nothing leaves your PC. There is no telemetry and no account. The only thing that opens a web page is the Buy / Renew button, which opens the checkout in your browser.
12. Troubleshooting#
| Problem | What to do |
|---|---|
| "This window has no access key" | Close the window and start Balloon Studio from its Start-menu icon. |
| A DWG is not read | Install the free ODA File Converter, or save the drawing as DXF. |
| A scanned PDF or photo gives no items | Scans are not supported yet. Use the PDF exported from the CAD system. |
| The discipline is wrong | Create the set with the discipline forced instead of Detect per sheet, then Re-run all. |
| Too many or too few balloons of one type | Use Confirm (§6) to tell the app what you balloon; it applies to every later drawing. |
| Windows asks before running the installer | Check the publisher shows Mir Solutions LLP (right-click the file → Properties → Digital Signatures). If it does not, do not run it; download it again from the link in §2. |
| "Licence invalid" after pasting a key | The key was made for another PC. Check the Machine ID in Settings matches the one you bought for, or use Lost key on the checkout page. |
Questions: hello@mirsolutions.in.